Products needed for 1 square metRE

To successfully build and install 1m² of Isiteek, it requires 2 packages of Isiteek Adhesive Sealer and 1 package of Stelmax.

Technical details:

Each box is delivered with 2m² of Isiteek. The thickness of the material is 4 mm, and the weight is 5 kg/m².

ISITEEK 2×45 PB

The 2×45 PB boasts a double plank design, incorporating a tongue and groove system for convenient gluing. Additionally, its black co-extruded caulk line spans the material thickness and runs consistently throughout the profile.

The profile itself is 90mm wide, composed of two 40mm planks separated by 5mm caulk lines.

ISITEEK 2×45 PW

The 2×45 PW boasts a double plank design, incorporating a tongue and groove system for convenient gluing. Additionally, its black co-extruded caulk line spans the material thickness and runs consistently throughout the profile.

The profile itself is 90mm wide, composed of two 40mm planks separated by 5mm caulk lines.

ISITEEK 60 MW

Choose the 60 MW if you prefer having margin boards around your panel. The 60 MW features a black co-extruded caulk line running down the edge of the profile and can be bent around a radius. For sharper curves, opt for the 125 KP.

The 60 MW is 60mm wide, comprising a 55mm plank and a 5mm caulk line.

ISITEEK 60 MB

Choose the 60 MB if you prefer having margin boards around your panel. The 60 MB features a black co-extruded caulk line running down the edge of the profile and can be bent around a radius. For sharper curves, opt for the 125 KP.

The 60 MB is 60mm wide, comprising a 55mm plank and a 5mm caulk line.

ISITEEK 125 KP

Use the 125 KP when the radius is too sharp for 60 MW/MB. It is a wide solid plank without caulking lines.

Profile width of 125mm, supplied as a 2m roll, covering 0.33m² per product.