What is Isiteek?

Isiteek is a DIY decking product designed for building simple panels.

Individuals can assemble it easily as it offers a straightforward system.

How DO I unpack Isiteek?

Unpack in an environment above 20 degrees Celsius, reroll with the top surface facing outwards, and let it sit in a warm room for 24 hours to remove structural “memory.”

IS ISITEEK non-slip?

Isiteek has similar non-slip properties to teak and performs well when wet.

WHAT IS ISITEEK MADE FROM?

Isiteek is synthetic and made using REACH compliant phthalate-free plasticiser. Additionally, it is fully recyclable, underlining our dedication to responsible manufacturing.

WHAT ARE MARGIN BOARDS?

The framing around the planks, known as a margin board, typically has a slightly wider section compared to the planks.

HOW DO I CUT THE DECK AFTER JOINING PLANKS?

Move the template on top of the assembled deck, mark around it, trim the planks slightly larger along the outside edge of the marked lines.

WHAT TOOLS DO I NEED TO FIT ISITEEK?

You will need the following tools:

A work bench with a straight edge to work against
Some weights
Masking tape
A sharp knife
A metal ruler 
Pair of compasses
Stelmax glue for joining the planks
Caulking gun
Flat levelling trowel roller

HOW DO I PANEL WITH A MARGIN BOARD?

If you want margin boards, first trim your rough panel so that you can see the edges of the template. Align the panel on your template. Using your compass set to 60mm or an off cut of margin board, mark your panel all the way round 60mm back from the edges of the template. Cut your panel out just outside the line and sand back to give an even edge. Cut your margin boards slightly over length for each edge. Offer up to ensure they are going to fit nicely without any gaps or unevenness.

HOW LONG IS ISITEEK’S MATERIAL GUARANTEE?

Isiteek comes with a 2-year material guarantee, against manufacturing defects.